CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 73

Buttons on these screens are described in the following chart.
When configuration of an IMAGE SETUP MENU is complete, press SAVE to retain
settings. If EXIT is pressed before SAVE, the CONTINUE AND ABANDON CHANGES
screen appears.
Press NO to prompt the active IMAGE SETUP MENU and retain changes by
pressing SAVE. Press YES to cancel changes and return to SETUP MAIN MENU 3.
Image Setup Menu Key
RESOLUTION DPI
DIMENSION
FACING
The RESOLUTION DPI setting of 200 is available on
select models.
These settings are used to define image quality.
For serial-number, full-note and ticket capture:
• Select 100 DPI to produce images with legible denominations, note
serial numbers and ticket validation numbers.
• Select 200 DPI to produce higher-quality images. The option builds on
the 100 DPI setting to include legible note plate details (series) and
ticket details (issue dates).
For check capture:
• Select 100 DPI to produce images with legible MICR lines and
amounts.
• Select 200 DPI to produce enhanced images with legible MICR lines
and amounts.
These settings are used to define an image-capture region for notes.
• Select OPT to capture snippets, or small cropped images, of serial
numbers.
• Select FULL to capture full-frame note images.
These settings are used to define which sides of a document are imaged.
For note, check and ticket capture:
• Select FACE ONLY to capture an image of the front side of a
document.
• Select BOTH to capture an image of the front and back sides of a
document.
© 2013 Cummins-Allison Corp.
Description
71