CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 17

15
Mode Key Description
Note processing: Scans all denominations and is best used when notes are
presorted by denomination and then stacked together. When the machine
encounters a change in denomination, it is called a denomination change. A
grand total is provided.
Check processing: Scans checks and stops on non-check documents with a
SORT
prompt to enter a MICR number. Remove the non-check document from the
pocket and press CONT. Check order integrity settings determine feed error
behavior. (See Check Setup Menu 2 for more information.) A grand total piece
count is provided.
Ticket processing: Scans tickets and stops when the machine encounters a non-
ticket document. A grand total piece count is provided.
Counts any type of media that complies with document size and density-setting
COUNT
specifications. This mode only counts pieces; document scanning does not
occur.
When FACE is selected in addition to STRANGER, MIXED or SORT mode, the
machine stops when it detects a non-faced document. The first document
processed determines the facing. A note example is shown below.
Faced Non-Faced
FACE
When ORIENTATION is selected in addition to STRANGER, MIXED or SORT mode,
the machine stops when it detects a non-oriented document. The first document
processed determines the orientation. A note example is shown below.
Oriented Non-Oriented
ORIENTATION
© 2013 Cummins-Allison Corp.