Check Setup Menu 2 - CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual

84

Check Setup Menu 2

Settings on this screen should be configured by authorized Cummins Allison
personnel only.
Pressing MORE on CHECK SETUP MENU 1 prompts the following screen.
This screen is used to configure parameters for maintaining item order when an error occurs
during check processing. Buttons on this screen are described in the following chart.
Check Setup Menu 2 Key
BACK
EXIT
BANK AND PRESENT
ORDERED RECOVERY
Returns to CHECK SETUP MENU 1.
Returns to SETUP MAIN MENU 7.
Setting for use by trained Cummins Allison personnel only.
ON: Select when maintaining check item order is required during
processing. When a feed error or jam occurs, remove processed checks
(banked checks) from the pocket. The machine traps the error in the
transport path and then presents the error in the pocket for correction.
OFF: Select when maintaining check item order is not required during
processing. When a feed error or jam occurs, all checks in the pocket
must be returned to the hopper for reprocessing, which is similar to the
procedure used when processing notes.
Setting for use by trained Cummins Allison personnel only.
ON: Select when maintaining check item order is required during
processing. When a feed error or jam occurs, the ordered-recovery option
provides detailed, on-screen instructions to guide users through recovery
and maintain item processing order.
OFF: Select when maintaining check item order is not required during
processing. When a feed error or jam occurs, the machine presents on-
screen instructions similar to those seen when a note-processing error
occurs.
JetScan iFX ® i100 Scanner
Description
All Models