CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 62

60
Setup Main Menu 1 Key
KEY STATUS
(Continued)
CF, ADD or VERIFY may be locked ON or OFF.
To lock a key ON:
1. On the main screen, turn the CF, ADD or VERIFY key ON.
2. Enter SETUP. Go to SETUP MAIN MENU 1 and press SET beside KEY
STATUS. On KEY AND FUNCTION ENABLE MENU 1, turn the desired
key OFF. When the machine returns to operating mode, the function
key is locked ON.
To lock a key OFF:
1. On the main screen, turn the CF, ADD or VERIFY key OFF.
2. Enter SETUP. Go to SETUP MAIN MENU 1 and press SET beside KEY
STATUS. On KEY AND FUNCTION ENABLE MENU 1, turn the desired
key OFF. When the machine returns to operating mode, the function
key is locked OFF.
3. When configuration is complete, press EXIT to return to SETUP MAIN
MENU 1 or press MORE to prompt the KEY AND FUNCTION ENABLE
MENU 2 screen shown below.
This menu allows the following functions to be enabled or disabled:
• CF SN (counterfeit document sensitivity control).
• DENSTY (density sensitivity control).
• SERNUM (SERIAL-NUMBER CORRECTION ADJUSTMENT screen).
When these functions are enabled (highlighted), the associated keys
appear on the ADJUSTMENT MENU.
When configuration is complete, press BACK to return to
KEY AND FUNCTION ENABLE MENU 1 or EXIT to return to SETUP
MAIN MENU 1.
JetScan iFX ® i100 Scanner
Description
The SERNUM key appears when the serial-
number capture option is active.
All Models