Setup Main Menu 1 Key
COMMUNICATIONS
Radio frequency present.
Install ferrite bead on all external
communication cables; position ferrite
bead near external port.
Only connect Ethernet cable to Ethernet
port.
Use of any other cable may damage
equipment.
Pressing SET prompts the SELECT DEVICE TO CONFIGURE screen shown
below. Communication ports for up to four external devices, such as a
printer or a computer data communication protocol for external software,
may be configured.
To configure communication port settings for an external device:
1. Press 1, 2, 3 or 4 to prompt the following screen:
© 2013 Cummins-Allison Corp.
Description
63