CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 36

34
File Export Menu Key
DOC EXPORT CFG
(Document Data Export
Configuration)
Prompts the DOC DATA EXPORT CONFIGURAITON screen below.
About FILE EXPORT NAME:
To customize the name of a file that will be exported:
1. Press SET to prompt the keypad. Press SHIFT to toggle the keypad
between capital letters, lower-case letters, and numbers and
symbols. Press SPACE to add a space between characters. If
necessary, press ◄ to delete one character, which will begin at the
right and move left.
2. Type in the desired file name; a dot (.); and a file-extension suffix
(example: image.csv). The file name can be 20 characters in length.
3. When finished, press DONE.
About FILE INCREMENT:
When FILE INCREMENT is ON, the machine automatically increments the
file name if a file with the same name already exists in the file location.
For example, if the file name is image.csv, the incremented file name will
be imagexx1.csv.
About FILE LOCATION:
To assign a file location for a file that will be exported:
1. Press USB to prompt the keypad and export the file to a USB drive
connected to the machine.
Press SHIFT to toggle the keypad among capital letters, lower-case
letters, and numbers and symbols.
Press SPACE to add a space between characters. If necessary, press
◄ to delete one character, which will begin at the right and move
left.
2. Type the file location. The root-directory symbol ( \ ) is displayed by
default. The machine cannot be used to create a directory. To export
a file to a specific directory on the flash drive, the directory must be
created on a PC before specifying it in the FILE LOCATION field.
JetScan iFX ® i100 Scanner
Description
All Models