CUMMINS ALLISON JetScan iFX i100 Operating Instructions Manual page 117

Term
Clear
Counterfeit (CF)
Detection
Count Mode
Day Total
Defaults:
Factory and User
Doubles
Facing Documents
Hopper
IQ Sensing
®
Technology
Labels
Mixed Mode
No Call
Orienting Documents
Used to reset accumulated totals for batches, sub-batches, day totals and straps
to zero. It is done by pressing CLEAR and then pressing the key corresponding to
the total to be cleared.
Users can set different infrared (IR), ultraviolet (UV), fluorescence (FL), and
magnetic sensitivity levels by denomination for the detection of suspect
documents. The lower the sensitivity, the greater the opportunity to pass a
counterfeit note. The higher the sensitivity, the greater the opportunity to stop on
a good, non-counterfeit note.
Follow hyperlink at left.
A day total is the grand total of deposits processed since the last time day totals
were cleared. Day total tracks individual amounts and provides a total by
category, as well as a grand total. Available in all operating modes.
The machine has two types of default settings: factory and user.
• Factory defaults are coded permanently into the machine and are active
when the device is shipped.
• User defaults, such as setup parameters, are configured during machine
setup and remain unchanged until reset. User defaults can be defined,
saved and retrieved by operators.
A condition that occurs when two stacked documents simultaneously pass
through the reading mechanism. The machine stops when this condition occurs.
When FACE is selected in addition to STRANGER, MIXED or SORT mode, the
machine stops when it detects a non-faced document. The first document
processed determines the facing.
The area on top of the machine where documents are placed for processing.
Advanced models feature this technology, which uses analytic software and
cutting-edge sensors to catch counterfeit notes. The technology can be upgraded
to enhance its ability to detect counterfeits as counterfeits evolve.
Press SET at MEDIA ENTRY in SETUP MAIN MENU 2 to prompt the MEDIA ENTRY
SETUP screen. Here, users create custom-titled label fields, such as account
number or store number. Via an automatically generated prompt or by pressing
MEDIA on the main screen, users enter data into the custom-titled label fields,
which then appear on printed reports.
Follow hyperlink at left.
The machine cannot identify a document or a denomination.
When ORIENTATION is selected in addition to STRANGER, MIXED or SORT mode,
the machine stops when it detects a non-oriented document. The first document
processed determines the orientation.
© 2013 Cummins-Allison Corp.
Definition
115