Programming; How To Program The Settings - Panasonic VL-V591 Installation And Operation Manual

Programming

How to program the settings

To register room numbers or program other settings, you need to enter programming mode using the PROGRAM switch on
the rear of the upper cabinet (page 5). To press the PROGRAM switch, use a pointed object such as a pen.
BUSY indicator
DOOR OPEN indicator
1
To enter programming mode, press and hold the PROGRAM switch for about 2 seconds
during standby.
2
Enter the desired function code, then press {CALL}.
Function
Registering room numbers
Confirming a room number
Confirming all room numbers
Canceling the registration of a room number
Canceling the registration of all room numbers
Setting the PIN
Setting the time for how long the door remains open using the PIN 006
3
Perform the operation according to the function. To save the setting, press {CALL}.
L T o end the setting, press {CLR}.
4
To end programming mode, enter {9}{9}{9}, then press {CALL}.
L T he unit returns to standby.
Note:
L T he DOOR OPEN indicator/BUSY indicator function as follows while programming.
Setting status
The unit is in programming mode.
The function code is entered. You can set the function.
The unit is waiting to save the setting.
The setting is being saved.
Error (such as when an invalid number is entered.)
L W hile programming the function in steps 2 to 3, you can stop programming by pressing {CLR}.
12
{CLR}
{CALL}
Code
001
002
003
004
044
005
DOOR OPEN indicator
OFF
OFF
Flashes slowly
Lights (for 1 second)
------
BUSY indicator
Flashes rapidly
Flashes slowly
Flashes slowly
Flashes slowly
Lights