Programming The Control Box; Quick Setup Wizard - Panasonic VL-VN1700 Installation Manual

4.4 Programming the Control Box

3. The Web Maintenance Console login screen is displayed. Log in with the specified account name and
password to launch Quick Setup Wizard. For details about Quick Setup Wizard, see "4.4.1 Quick Setup
Wizard".
4.4 Programming the Control Box

4.4.1 Quick Setup Wizard

In Quick Setup Wizard, you configure the mandatory settings for the Control Box. When you log in to Web
Maintenance Console and the Control Box is in its initialised, factory default state, Quick Setup Wizard
starts automatically. You must log in using the following user name and password.
–
The user name is "INSTALLER".
–
The default password is "1234".
Welcome to Panasonic VL-VN1700
On this screen, you can either import a previously configured system data file or proceed to manually
configure the Control Box's settings.
To import a previously configured system data file
1.
Log in to Web Maintenance Console (interactive mode).
2.
Click File Import.
3.
In Offline Data Import screen, click Browse, and then select a preconfigured DNSYS file.
4.
Click Execute.
5.
When you are prompted to restart the Control Box, click OK.
To configure the Control Box's settings manually
1.
Click Install next to installation setup.
2.
On the screen that appears, specify the settings as explained below.
UM Prompt Setting
–
Language: Select your language from the drop-down list.
Password Setting
An administrator account with the user name "97000" and the password you specify here will be
created.
–
Installer password: Enter a new password (except default password).
–
Re-enter: Enter the new password (except default password) again for confirmation.
3.
Click Start Setup Wizard, and then continue the configuration.
Date & Time
On this screen, you can specify the settings for the system date and time.
When you have finished specifying the settings, click Next to continue.
System Time
•
Time Zone: Select the time zone from the drop-down list.
•
Local Time: Click the Local Time box, and then specify the date and time.
SNTP Setting
•
IP Address: Enter the IP Address or host name of the SNTP Server.
44 Installation Manual