System Programming Using My Portal; User Programming - Panasonic VL-VN1700 Operating Manual

3.1 System Programming Using My Portal

3.1 System Programming Using My Portal

3.1.1 User Programming

You can edit your personal information as well as limited extension and mailbox settings using My Portal.
(You can view menus and setting items, but you can edit only a limited number of items.)
–
Accessing My Portal for the First Time
–
Logging in to My Portal
–
My Portal Screen
–
Editing Settings in My Portal
–
Logout
•
The contents and design of the software are subject to change without notice.
Accessing My Portal for the First Time
This step is required only when accessing My Portal for the first time.
•
For the IP address of the Control Box, login name, and password, ask your System
Administrator.
•
If the configuration of the Web browser or PC changes, the certificate may need to be
installed again. Once a certificate has been installed, My Portal will be displayed after
step 2.
1.
Launch your Web browser and input the IP address of the Control Box followed by "/WebMC/
users_portal/login" into the address bar, and then press Enter.
2.
If you connect to My Portal using TLS, a security alert window is displayed. Follow the prompts to install
a security certificate. The procedure may vary according to your browser.
Logging in to My Portal
After establishing a connection to My Portal, the login window is displayed, and a login name and password
must be entered.
40 Operating Manual