List Of Windows Event Logs - NEC Express5800/R320g-M4 Maintenance Manual

Hide thumbs Also See for Express5800/R320g-M4:
Table of Contents

Advertisement

Chapter 1 Maintenance
6.3

List of Windows Event Logs

OS
 Event log
Source
ID
System Event Log for all Windows OS
 System Event Log
Cdrom
51
Upon OS installation
Windows Server 2016
System Log
l2nd
4
When installing an OS, starting system,
or applying Starter Pack
b57nd60a
4
When installing an OS, starting system,
or applying Starter Pack
ixgbs
27
When starting system or installing
Starter Pack
ixgbi
27
When installing an OS
Microsoft-Windows-
Kernel-PnP
219
When starting system or connecting a
disk
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
68
Note
Confirm also "Chapter 1 (8.11 Event Logs)".
Type
Timing
Error detected on the device \Device\CdRom0 during the paging
Warning
operation.
This event may be registered in the event viewer, but this does not
affect system operation.
QLogic BCM57810 10 Gigabit Ethernet (NDIS VBD Client) #xx: The
Warning
network link is down.
Check to make sure the network cable is properly connected.
This event does not affect system operation.
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
This event does not affect system operation.
Intel(R) Ethernet Controller X550 #xx
Warning
Network link is disconnected.
This event does not affect system operation.
Intel(R) Ethernet Controller X550 #xx
Warning
Network link is disconnected.
This event does not affect system operation.
The driver \Driver\WudfRd failed to load for the device
Warning
xxxxxxxxxxxxxxxxxx.
This may be recorded when starting the system or connecting a disk
depending on timing, but does not affect system operation.
Message (Description)
Action
6. Error Messages

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents