Removing Pci Card; Replacing Pci Card - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.7.3 Removing PCI Card

To remove PCI card, follow the reverse procedure of the installation, and then install the blank cover.

5.7.4 Replacing PCI Card

Follow the steps below to replace the failed PCI card.
(1)
N8804-012 1000BASE-T 2ch Adapter Kit and N8804-013 10GBASE-T 2ch Adapter Kit
1. Identify the failed card by viewing Event Log.
2. Remove the duplex LAN according to Chapter 2 (3.1.4 Removing Duplex LAN).
3. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
4. Remove the PCI card.
5. Replace the card and secure it.
6. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
The installed CPU/IO module will start automatically.
7. Confirm that the PCI card is correctly recognized by POST and OS.
8. Create the team again. For details, see Chapter 2 (3.1.3 Configuring Duplex LAN).
9. Connect the network cable.
(2)
N8803-040AF Fibre Channel 1ch Adapter Kit
1. Identify the failed card by viewing Event Log.
2. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
3. Configure WWPN of Fibre Channel card to be installed (setting/confirming access control) by using
control software such as NEC Storage Manager.
4. Remove the PCI card.
5. Replace the card and secure it.
6. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
7. Connect the network cable and cables for optional devices.
The installed CPU/IO module will start automatically.
8. Confirm that the PCI card is correctly recognized by POST and OS.
(3)
N8803-041 SAS controller
1. Identify the failed card by viewing Event Log.
2. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
3. Remove the PCI card.
4. Replace the PCI card and secure it.
5. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
6. Connect the network cable and cables for option devices.
The installed CPU/IO module starts automatically.
7. Confirm that the PCI card is correctly recognized by POST and OS.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
5. Installing Optional Devices
177