Chapter 1 Maintenance - NEC Express5800/R320g-M4 Maintenance Manual

NEC Express5800 Series
Express5800/R310g-E4, R320g-E4, R320g-M4
This chapter explains maintenance of server, and what actions are to be taken in case of trouble when operating
this server.
1. Relocation and Storage
Describes how to move and store this server.
2. Daily Maintenance
Describes what you must confirm for daily use, how to manage files, and how to clean the server.
3. User Support
Describes various services on this product.
4. Maintenance of Express5800/ft series
Describes how to start, stop, diagnose each components of this server, and how to update firmware.
5. Checking the Duplex State of Modules
Describes how to check if the system runs properly after system installation or reinstallation.
6. Error Messages
Describes error messages and actions to be taken at occurrence of an error.
7. Collecting Failure Information
Describes how to collect information about the location where a failure occurred and its cause if the server
malfunctions. See this section in case of a failure.
8. Troubleshooting
Describes how to identify the causes of problems and what actions are to be taken to address them. See this
section if you suspect a failure.
9. Windows System Recovery
Describes Windows recovery setup. See this section if Windows is corrupt.
10. Resetting and Clearing the Server
Describes how to reset or clear the server. See this section if the server is not working or if you want to
restore BIOS settings to the factory settings.
11. System Diagnostics
Describes the system diagnostics of this server.
12. Offline Tools
Describes tools for preventive maintenance of this product.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Maintenance
15