NEC Express5800/R320g-M4 Maintenance Manual page 42

Chapter 1 Maintenance
5. Choose Specify new firmware for update, type the path to the BIOS image file entered in Step 1 into
the text box, and click Activate.
The firmware update starts.
6. Check the firmware update status.
When the firmware update is completed, check that the firmware revision is modified as you expect.
7. When the BIOS update completes, click JumpSwitch.
The CPU module of which BIOS has been updated starts, and the other CPU module stops.
( "Jump Switch" can be carried out to module of "Power supply stopped". )
8. Click Firmware Update on Update screen of the CPU module in halt status.
9. Select Copy firmware from Online module to Offline one on Firmware Update screen, and click
Activate.
Another CPU/IO module BIOS update is executed.
10. Confirm the firmware update status.
When the firmware update is completed, check that the firmware revision is modified as you expect.
11. Confirm the update, and then start CPU module.
12. When Status Information of the CPU module screen is "Duplex", the update is finished.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
42
The update result can be checked by State of target component.
Tips
The status is not refreshed automatically. Choose View menu  Refresh on the utility to
check the current status.

Tips Pressing <F5> key refreshes the display of ft server utility.
Display changes according to progress of update process.
Updating firmware  " Firmware Update",
Firmware update is completed  "Firmware update complete"

It takes about 20 minutes until the update of either of CPU module is completed.

Tips Pressing <F5> key refreshes the display of ft server utility.
Display changes according to progress of update process.
Updating firmware  " Firmware Update",
Firmware update is completed  "Firmware update complete"

It takes about 20 minutes until the update of either of CPU module is completed.
4. Maintenance of Express5800/ft series