NEC Express5800/R320g-M4 Maintenance Manual page 198

Chapter 3 Useful Features
ii. MAC [XX:XX:XX:XX:XX:XX] submenu
Option
iSCSI Attempt Name
iSCSI Mode
Internet Protocol
Connection Retry Count
Connection Establishing
Timeout
OUI-format ISID
Configure ISID
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
Gateway
Get target info via DHCP
Target Name
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
198
Parameter
Up to 96 alphanumeric Specify of an iSCSI attempt name.
characters
[Disabled] Specify the iSCSI mode
Enabled
Enabled for MPIO
[IP4] Specify the IP mode of iSCSI.
IP6
0-[5]-16 Specify the number of iSCSI connection retries.
100-[16000]-20000 Specify a timeout value of iSCSI connection (msec.).
For display only Displays the OUI-format ISID.
6 numerals Specify the lower 3 bytes of OUI-format ISID. MAC
address value is stored as a default value.
[Disabled] Enable or disable DHCP.
Enabled
IP Address Specify an IP address of the initiator. When Enable
DHCP is enabled or Internet Protocol is IP6, this option
does not appear.
IP Address Specify a subnet mask of the initiator. When Enable
DHCP is enabled, this option does not appear.
IP Address Specify the gateway. When Enable DHCP is enabled,
this option does not appear.
[Disabled] Enable or disable the function acquiring target
Enabled information via DHCP. When Enable DHCP is disabled,
this option does not appear.
4 to 223 alphanumeric Specify a target name in the iSCSI qualifier (IQN) format.
characters When Get Target info via DHCP is enabled, this option
does not appear.
Descriptions
1. System BIOS