Procedure In The Ft Server Utility - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 1 Maintenance

4.6.2 Procedure in the ft server utility

Follow the steps below to update BMC firmware.
1. Click the Firmware button on Firmware.
The Firmware Update dialog box appears.
2. Specify the path to the firmware, and then click Activate.
Confirmation dialog box appears.
3. Click OK on the Confirmation dialog box.
The firmware update starts.
4. When the firmware update is completed, check that the firmware revision is modified as you expect.
Confirm the BMC firmware status. Pressing <F5> key refreshes the display of the BMC firmware status.
If the status is "Duplex, Duplex", the update is complete.
It takes about 40 minutes until the update of BMC firmware on both systems is completed.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
44
To update BMC firmware, a firmware image file for updating needs to be stored on
Important
the ft server. BMC firmwares can be downloaded from NEC web site. Please follow
"2.1 Checking and Applying Updates".
4. Maintenance of Express5800/ft series