NEC Express5800/R320g-M4 Maintenance Manual page 123

Chapter 2 Configuring and Upgrading the System
4. On the left pane of the RDR Utility, right click on the Slot 1 disk of PCI module 10 and select Create RDR
Virtual Disk.
Depending on the disk condition, RDR setting may take some time and RDR Utility may pause for a few
minutes. There is no error, so wait until the process is completed.
5. Click Yes.
6. Click OK.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)

If RDR is specified to a disk which contains the system partition or partition
Important
which cannot be unmounted such as setting the paging file, pop-up message of
Step 6 does not appear.
Because pop-up message that reboot of the system is needed appears, click
Close or OK. The system will be automatically rebooted 2 minutes later. Go on to
Step 7 after the system is rebooted.
In addition, when the system does not reboot automatically but there is no
change in setting of RDR, reboot the system manually.

Disk may become offline when RDR is set. In this case, use "Disk Management"
to make it online.
1. Hard Disk Drive Operations
123