NEC Express5800/R320g-M4 Maintenance Manual page 181

Chapter 2 Configuring and Upgrading the System
6. Fix the Internal USB cable connector on the CPU/IO board.
7. Fix the Internal USB cable connector on the chassis with screws.
8. Fix the Internal USB cable with the cable clamp.
9. Install the CPU/IO module (see Chapter 2 (5.4.2 .Installing CPU/IO module).
10. Connect a network cable and a cable to be connected with an optional device.
11. Connect the power cord.
12. Press the POWER switch to power on.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Important Align connectors of both notches.
Fit the Internal USB cable connector's lugs onto the holes on the chassis.
Important
5. Installing Optional Devices
181