NEC Express5800/R320g-M4 Maintenance Manual page 83

Chapter 1 Maintenance
[?] Telnet service is not installed:
Does the computer name exceed 14 characters?

 Install the telnet service according to the following procedure:
1.
2.
3.
4.
5.
[?] Unable to configure the details of network adapter:
Did you configure the details of network adapter during setting up the server?

 Configure the details of network adapter after installing Windows. You cannot configure the
details during setup.
[?] Rebooted during the setup:
Did you specify the correct setting of OS Boot Monitoring?

 See Chapter 1 (3.1.3 Disabling OS Boot Monitoring Feature) in Installation Guide (Windows).
[?] ft Server Control Software UPDATE Disk is not included:
 If the update program does not exist, the server does not come with the ft Server Control
Software UPDATE disk.
[?] Windows can be operated after installing but each module or PCI card is not duplex state. (Status
LED on the CPU/IO module does not light green):
Did you abort the installation during a setup such as by closing a window of the programs that are

running?
 Reinstall the Windows according to Chapter 1 (2. Setting Up the Operating System) in
Installation Guide (Windows).
[?] DISK ACCESS LED is blinking in amber:
Did you properly setup the duplex of HDDs?

 For details about the indication, see Chapter 1 (6.1 Error Indication by LED).
See Chapter 2 (1. Hard Disk Drive Operations), and set up the duplex of HDDs.
[?] During setting up, Error or Warning logs are recorded in System and Applications Event Log:
 Ignore the logs during setting up.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Adjust the computer name to 14 characters or less.
Click Run on Start menu.
Type tlntsvr/service in Open, and then click OK.
Click Start menu, point to Control Panel, click Windows Administrative Tools, and then
click Services (or select Start - Administrative Tools - Service) to confirm whether the telnet
service is registered.
Specify the computer name with 15 characters or more if necessary.
8. Troubleshooting
83