Details Of Expressbuilder; Starting Expressbuilder; Menus Of Expressbuilder - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 3 Useful Features
5.

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install Windows and maintain the server. EXPRESSBUILDER also provides
bundled software and instruction manuals.
5.1

Starting EXPRESSBUILDER

You can start EXPRESSBUILDER by using the EXPRESSBUILDER DVD as follows:
(1) Insert the DVD into the server, and then restart.
Boot Selection Menu shown in Chapter 3 (5.2 Menus of EXPRESSBUILDER) - (1) Boot Selection Menu
will appear.
(2) Insert the DVD into a computer running Windows.
Autorun Menu shown in Chapter 3 (5.2 Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.
If the menu does not appear, run the following file on DVD.
\autorun\dispatcher_x64.exe.
5.2

Menus of EXPRESSBUILDER

You can operate EXPRESSBUILDER by using onscreen menus.
(1)
Boot Selection Menu
When the server starts from EXPRESSBUILDER, the following menu appears.
Choose an item by using arrow keys and <Enter> key.
OS installation
Tool menu
When OS installation is chosen or no key is pressed, Home Menu shown in (2) Home Menu will appear.
When Tool menu is chosen, Tool Menu shown in (3) Tool Menu will appear.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
236
When it is necessary to boot from EXPRESSBUILDER, pull out one side or both side
Important
of the disks from inserted disks which is duplexing by the RDR function before boot.
Boot selection
*** default ***
5. Details of EXPRESSBUILDER