List Of Windows Event Logs - NEC N8100-1909F Maintenance Manual

Hide thumbs Also See for N8100-1909F:
Table of Contents

Advertisement

Chapter 3 Appendix
2.

List of Windows Event Logs

OS
Event Log
Source
ID
Timing
All Windows OS
System Event Log
Cdrom
51
Upon OS installation
Windows Server 2008 R2
System Event Log
iScsiPrt
1
When Windows Server 2008 R2 is
operating while iSCSI is recognized
b57nd60a
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
l2nd
4
Upon system startup or upon applying
Starter Pack
Type
Message (Description)
Action
Error detected on the device \Device\CdRom0 during the paging
Warning
operation.
This event may be registered in the event viewer, but this does not
affect system operation.
Initiator failed to connect to the target. Target IP address and TCP Port
Error
number are given in dump data.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/976072/en-us
Broadcom NetXtreme Gigabit Ethernet #xx: The network link is down.
Warning
Check to make sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57711 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Broadcom BCM57810 #xx: The network link is down. Check to make
Warning
sure the network cable is properly connected.
If the message appears upon system startup or upon applying Starter
Pack, there is no problem in system operation.
Express5800/E120d-M Maintenance Guide
2. List of Windows Event Logs
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/e120d-mExpress5800 seriesN8100-1908f

Table of Contents