NEC Express5800/R320g-M4 Maintenance Manual page 101

Chapter 1 Maintenance
[?] Error logs are recorded while in maintenance operation:
 While in maintenance operation, such as detaching a PCI module, the following events may be
recorded. These logs show that the PCI module was detached.
This does not affect the system operation.
Source:
Type:
Event ID:
Description: The device 'XXX' disappeared from the system without first being prepared for
[?] Error logs are recorded while dumping memory:
 If DUMP process starts with DUMP switch or system clash, there is a possibility that the
following log is registered on the system event log after reboot.
Source:
Type:
ID:
Description: CpuBoard dump, to file [file path], has failed because the CpuBoard is not holding a
If the following log is registered on the system event log after reboot, DUMP process saves the
DUMP file on the HDD. (Please ignore the above log.)
Source:
Type:
ID:
Description: The computer has rebooted from a bugcheck. The bugcheck was:
[?] ftSysMad is recorded in System Event Log:
 If performance counter registry information is cracked by unexpected shutdown, the following
log may be recorded as an application log. Execute a command (lodctr /R) to recover the
registry information and then activate the services recorded in the event log. You need not
operate any hardware.
Source:
Type:
ID:
Description: Service xxx has stopped due to unexpected COM exception.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
PlugPlayManager
Error
12
removal.
srabid
error
4096
valid memory dump image (0xd)
Microsoft-Windows-WER-SystemErrorReporting
error
1001
[XXX]([XXX],[XXX],[XXX],[XXX]).
A dump was saved in: [file path name].
(XXX depends on condition.)
ftSysMad
error
11704
Microsoft performance counter database may be corrupt.
Please run lodctr /R to recover.（xxx is a name of service that is stopping.）
8. Troubleshooting
101