Procedure In The Ft Server Utility - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 1 Maintenance

4.1.3 Procedure in the ft server utility

Follow the steps below to start component.
1. Choose the target component by using the ft server utility.
2. Check the current state of the target component by selecting View menu  Refresh on the utility.
See 4.1.1 Available Status.
3. Click the Up button of the target component.
Follow the steps below to stop the component.
1. Choose the target component by using the ft server utility.
2. Check the current state of the target component by selecting View menu  Refresh on the utility.
See 4.1.1 Available Status.
3. Click the Down button of the target component.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)

Tips The target component starts after a while.

The start result can be checked by Status of target component.
The status is not refreshed automatically. Choose View menu  Refresh on the utility
to check the current status.

Tips The target component stops after a while.

The stop result can be checked by Status of target component.
The status is not refreshed automatically. Choose View menu  Refresh on the utility
to check the current status.
Sample screen of ft server utility
4. Maintenance of Express5800/ft series
27