NEC Express5800/R320g-M4 Maintenance Manual page 179

Chapter 2 Configuring and Upgrading the System
(2)
N8803-040AF Fibre Channel 1ch Adapter Kit

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8803-040AF Fibre Channel 1ch Adapter Kit and start the system.
After starting the system, the driver will be installed automatically. When the system is started, New
Hardware Found window may appear.

Driver for Fibre Channel controller
The following programs may be installed on the server at shipment. These programs are also installed when
you re-install an OS by using EXPRESSBUILDER DVD.
These programs are driver for Fibre Channel controller. Therefore do not uninstall these programs.
– QLogic Super Installer
(3)
N8803-041 SAS Controller

Slots to install optional PCI cards
See "List of option PCI cards and installable slots" in Chapter 2 (5.7.1 Precautions).

Driver installation procedure
Install N8803-041 SAS card and start the system.
After starting the system, the driver will be installed automatically. When the system is started, New
Hardware Found window may appear.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)

StoragePathSavior is necessary to connect NEC iStorage using N8803-040AF
Important
Fibre Channel 1ch controller.

Mount N8803-040AF Fibre Channel 1ch controller after completing the OS
installation. They are used in a pair. Mount each controller on the slot of the
same position of each PCI module.
5. Installing Optional Devices
179