Installing Dimm - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.5.1 Installing DIMM

Follow the steps below to install the DIMM.
1. Shut down OS.
The sever turns off automatically.
2. Disconnect the power cords from the outlets.
3. Remove the CPU/IO module according to Chapter 2 (5.4.1 Removing CPU/IO Module).
4. Remove three screws (two on the front and one on the rear), and remove the top cover of the CPU/IO
module.
5. Remove the air duct.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
5. Installing Optional Devices
Air duct
163