Removing Duplex Configuration Of Rdr Disks - NEC Express5800/R320g-M4 Maintenance Manual

Chapter 2 Configuring and Upgrading the System
1.2.3

Removing duplex configuration of RDR disks

This section describes how to remove duplex configuration from the disk with RDR setting.
In the example below, the duplex setting of the disks in the Slot 1 of the PCI modules 10 and 11 is removed.
1. Click Start – RDR – RDR Utility to start RDR Utility.
2. Right-click a disk you want to cancel RDR from the tree in the left pane, and select Delete RDR
configuration on Physical Disk.
3. Click Yes.
4. Click OK.
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Important Do not release the RDR setting of the system disk.

Tips After running the command, RDR settings will be cancelled but other data will remain.

You cannot release the duplex setting of the dynamic disk.

The display of RDR Utility is not updated automatically. Therefore, update it every time
you check the status of disks by clicking Refresh from Action on the menu or pressing
<F5>.
1. Hard Disk Drive Operations
127