Glossary - NEC Express5800/R320g-M4 Maintenance Manual

Glossary

Term
BIOS Setup Utility (SETUP)
BMC
BMC Configuration
CPU module
CPU/IO module
DUMP Switch
EXPRESSBUILDER
EXPRESSSCOPE ENGINE 3
Express Report Service
Express Report Service (HTTPS)
ExpressUpdate
ExpressUpdate Agent
Flash FDD
NEC ESMPRO
NEC ESMPRO Agent
NEC ESMPRO Agent Extension
NEC ESMPRO Manager
OEM driver
OS standard installer
Offline tools
PC for Management
PCI module
Product Info Collection Utility
Starter Pack
Windows OS parameter file
244
Express5800/R310g-E4, R320g-E4, R320g-M4 Maintenance Guide (Windows)
Software for setting BIOS. You can run this software by pressing <F2> key during POST.
Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI
version 2.0 protocol. BMC can manage the server hardware.
Software for setting BIOS and BMC. You can use as Windows application or run this
software when pressing <F4> key during POST.
A CPU subsystem logically configured in a CPU/IO module. It includes CPUs and
memory.
A module that includes CPUs (processors), memory, PCI boards, a cooling fan, hard disk
drives and power supply units.
A switch that is used for collecting the memory dump if an error occurs. You can specify
the destination of the dump by using the OS function.
Standard software for setting up the server easily. This also includes several useful
applications and instruction manuals.
A name of BMC for NEC Express5800 series.
Software that can report the server failure to the contact center by E-mail or modem. This
software is installed with NEC ESMPRO Agent to the server.
Software that can report the server failure to the contact center by HTTPS.
A feature for updating BIOS, firmware, driver, and other software of the server. This
feature is available when NEC ESMPRO Manager cooperates with EXPRESSSCOPE
ENGINE 3 and ExpressUpdate Agent.
Software for performing ExpressUpdate. This is installed to the server.
An optional USB device that can use as a floppy disk drive.
Standard software for the server management. This consists of several applications for
managing or monitoring.
Software for monitoring the server. This works with NEC ESMPRO Manager and resides
as the OS service.
Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
Software for managing a number of servers on network.
A Windows driver for the mass storage device.
An installer that stored in Windows installation disc. Use this installer if you want to install
the OS manually.
Software that can read and change SEL, SDR, FRU and other IPMI data. You can start
Offline tools when pressing <F4> key during POST.
A computer for managing the server on network. A general Windows/Linux computer can
be used as "PC for Management".
An I/O subsystem logically configured in a CPU/IO module. It includes hard disk drives,
PCI cards, BMC and 1G/10G LAN.
Software for collecting several hardware/software statuses and event logs. You can easily
collect the data for the server maintenance by using this software.
Software package for the server. This software includes the customized drivers for
Windows. This must be installed before using Windows on the server.
A file that saved settings for installing Windows. You can install with the saved settings in
this file when installing Windows with EXPRESSBUILDER.
Description
Glossary