List Of Windows Event Logs - NEC Express5800 Series Maintenance Manual

Chapter 3 Appendix
2.

List of Windows Event Logs

OS
Event Log
Source
ID
Timing when an event is logged
All Windows OS
System Event Log
Cdrom
51
When installing an OS
Application Popup
56
When starting system
SmartDQa
129
While the system is running
SmartPqi
129
When running the system
Type Message (Description)
Action
Error detected on the device \Device\CdRom0 during the paging
Warning
operation.
This event may be registered in the event viewer, but this does not affect
system operation.
The SCSI device driver returned an invalid ID for a child device
(XXXXXX).
* This event can be displayed as follows, but this does not affect the
system operation. The ID can be different depending on your
environment.
" The description of event ID 56 from the source "Application Popup"
cannot be found. The component which causes this event is not installed
on the local computer or the installation is damaged. Install the
Error
component on the local computer or repair it.
If the event occurs on another computer, you must save the displayed
information with it.
The event contains the following information:
SCSI
XXXXXX
The message resource is present, but the messages can not be found in
string table or message table.
This event can be registered in the system, which multiple RAID
controllers and SAS controllers are connected to, but this does not affect
the system operation.
Reset was issued to the device \Device\RaidPort(x).
Warning
(x is any number)
If this message has been registered as a log during heavy I/O, there is no
problem since the OS has succeeded in retry. Continue using.
Reset was issued to the device \Device\RaidPort(x).
Warning
(x is any number)
Even if the message is registered in the log, there is no problem because
the OS has successfully completed the retry. you don't need any
changes.
Express5800/R120h-1E, R120h-2E Maintenance Guide
2. List of Windows Event Logs
219