Table of Contents
Advertisement
Chapter 2 Convenient Features
6.
Details of EXPRESSBUILDER
EXPRESSBUILDER helps you to install an OS or check the server. Bundled software and documents are
provided in EXPRESSBUILDER.
6.1
Starting EXPRESSBUILDER
Use a DVD (labeled as EXPRESSBUILDER) that comes with your server to start EXPRESSBUILDER.
(1) Insert the DVD to the optical disk drive of the server, and then reboot by turning off and on the server or
by pressing <Ctrl> + <Alt> + <Delete> keys.
Boot Selection Menu shown in Chapter 2 (6.2 Menu - (1) Boot Menu) appears.
(2) Insert the DVD into a computer on which operating system is running.
Autorun Menu shown in Chapter 2 (6.2 Menu - (3) Autorun Menu) appears.
6.2
Menu
EXPRESSBUILDER is operated by using onscreen menus.
(1)
Boot Selection Menu
When EXPRESSBUILDER starts from DVD, below menu appears.
Use the upper and lower arrow keys to move the cursor, and then press <Enter> key to select it.
Os installation (default) is selected if no key is pressed.
If Os installation is selected, Top menu shown in (2) Top Menu appears after confirmation of Windows PE
software license.
If Tool menu (Normal mode) is selected, Tool Menu shown in (3) Tool Menu appears. Select this mode
normally.
If Tool menu (Redirection mode) is selected, you can operate EXPRESSBUILDER remotely by using BIOS
Console Redirection feature. In this mode, the menu items and the tools that can be activated are the same as
those in normal mode.
94
Remove other removable media before rebooting the server.
Tips
Boot selection
Os installation *** default ***
Tool menu (Normal mode)
Tool menu (Redirection mode)
Be sure to select Normal Mode when using the remote KVM feature.
Tips
Express5800/E120d-M Maintenance Guide
6. Details of EXPRESSBUILDER
Advertisement
Table of Contents
