Details Of Expressbuilder; Starting Expressbuilder - NEC Express5800/R120g-1E Maintenance Manual

Chapter 2 Useful Features
5.

Details of EXPRESSBUILDER

EXPRESSBUILDER helps you to install Windows and maintain the server.
EXPRESSBUILDER also provides bundled software and instruction manuals.
5.1

Starting EXPRESSBUILDER

You can start EXPRESSBUILDER by using the following ways:
Internal Flash Memory:
Remove a CD/DVD and removable media from the server, restart the server and press <F3> key at the
following POST message.
Press <F2> SETUP, <F3> Internal Flash Memory, <F4> ROM Utility, <F12> Network
When EXPRESSBUILDER starts from Internal Flash Memory, Boot Selection Menu shown in Chapter 2
(6.2 Menus of EXPRESSBUILDER) - (1) Boot Selection Menu will appear.
Windows Application:
After installing Starter Pack in the server, you can run EXPRESSBUILDER as a Windows application.
Run NEC EXPRESSBUILDER from Start Menu or run the shortcut on the desk top.
When EXPRESSBUILDER starts as a Windows application, Autorun Menu shown in Chapter 2 (6.2 Menus
of EXPRESSBUILDER) - (4) Autorun Menu will appear.
EXPRESSBUILDER DVD:
EXPRESSBUILDER DVD can be downloaded from the following website.
http://www.nec.com/
Use the DVD by the following two ways:
(1) Insert the DVD into the server, and then restart.
Boot Selection Menu shown in Chapter 2 (6.2 Menus of EXPRESSBUILDER) - (1) Boot Selection
Menu will appear.
(2) Insert the DVD into a computer running Windows.
Autorun Menu shown in Chapter 2 (6.2 Menus of EXPRESSBUILDER) - (4) Autorun Menu will appear.
172
Express5800/R120g-1E Maintenance Guide
5. Details of EXPRESSBUILDER