Chapter 2 Configuring and Upgrading the System
11. Close the latch and secure it with one screw removed
in step4.
12. See Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
13. Connect the power cords.
14. Press the POWER switch to power on the server.
15. Verify that POST displays no error message.
If POST displays an error message, write it down and see the POST error message list in Chapter 1 (6.2
POST Error Message).
5.7.3
Removing PCI Card
To remove PCI card card, follow the reverse procedure of the installation and install the blank cover.
Express5800/R320e-E4, R320e-M4 Maintenance Guide (Linux)
5. Installing and Replacing Optional Devices
145