General Specifications; Safety; Electromagnetic Compatibility (Emc); Port Specifications - Cabletron Systems TRBMIM-T User Manual

Token ring bridge/management module

Hide thumbs Also See for TRBMIM-T:

Table of Contents

REQUIREMENTS AND SPECIFICATIONS

Asserting The Clear to Send Signal With The JP5 Jumper

Use the JP5 jumper to set the Clear To Send (CTS) signal for the Console

port to either the internally asserted mode or the externally activated

terminal-signal mode.

•

The JP5 jumper's default position is over pins 1 and 2, to allow

activation of the CTS signal from a terminal. This is the recommended

setting.

•

To internally assert CTS, place the JP5 jumper over pins 2 and 3. Use

this setting if your modem requires CTS.

2.6 GENERAL SPECIFICATIONS

This section lists various TRBMIM-T speciﬁcations.

This unit meets the safety requirements of UL 1950, CSA C22.2 No. 950,

and EN 60950, IEC950, and 73/23/EEC.

This unit is compliant with the requirements of FCC part 15,

CSA C108.8, EN 55022, VCCI V-3/93.01, EN50082-1, and 89/336/EEC.

2.6.3 Port Speciﬁcations

Management Port:

Network/Bridge Ports:

2.6.4 Physical Speciﬁcations

Dimensions:

Shipping Weight:

2-10

1 female DB9 RS232C

1 TPIM/Station port receptacle

1 FNB interface port

34.0 D x 29.2 H x 5.1 W

centimeters

(13.4 D x 11.5 H x 2.0 W inches)

Under 4lbs.

Table of Contents