Wpim-Sy Specifications - Cabletron Systems WPIM-SY Management Manual

CHAPTER 1: INTRODUCTION

1.3 WPIM-SY SPECIFICATIONS

This section describes the environmental specifications and safety and
approval requirements for the WPIM-SY. Cabletron Systems reserves the
right to change these specifications at any time without notice.
Environmental Requirements
Operating Temperature:
Non-operating Temperature: -30 to +90 C (-22 to 194 F)
Operating Humidity:
Safety
This unit meets the safety requirements of UL1950 (without D3
deviations), CSA C22.2 No. 950, and EN60950.
EMI
This unit meets the EMI requirements of FCC Part 15 Class A, EN55022
Class A and VCCI Class I.
EMC
This unit meets the EMC requirements of EN50082-1 including: IEC
801-2 (ESD), IEC 801-3 (Radiated Susceptibility), and IEC 801-4
(EFT/B).
NEBS
This unit has been tested by Bellcore and found to comply with the
following Bellcore standards:
TR-NWT-000063 Network Equipment Building System (NEBS)
GR-1089-CORE EMC and Electrical Safety Generic Criteria for
It is the responsibility of the person who sells the system to
which the WPIM-SY will be a part to ensure that the total
WARNING
system meets allowed limits of conducted and radiated
emissions.
1-4
+5 to +40 C (41 to 104 F)
5% to 95% (non-condensing)
Generic Equipment Requirements.
Network Telecommunications Equipment.
WPIM-SY LOCAL MANAGEMENT GUIDE