Operating Specifications - Cabletron Systems TPMIM-22 Installation Manual

10base-t twisted pair media interface module (tpmim-22/24/32/34)
Table of Contents

Advertisement

Temperature - Multi-pair, PVC 24 AWG telephone cables have an attenua-
tion of approximately 8 to 10 dB/100 m at 20 C. The attenuation of PVC
insulated cable varies significantly with temperature. At temperatures greater
than 40 C, we strongly recommend that you use plenum rated cables to en-
sure that cable attenuation remains within specification.
2.2

OPERATING SPECIFICATIONS

The operating specifications for the Cabletron Systems TPMIM are included in
this section. Cabletron Systems reserves the right to change these specifications
at any time without notice.
RJ-45 INTERFACE (TPMIM-22/24)
Internal Transceiver:Cabletron Systems' TPT 10BASE-T Twisted Pair
Transceiver.
Type:Internally Crossed Over RJ-45 Jack
Pin
1
RX+
2
RX-
3
TX+
4
No Connection
REQUIREMENTS/SPECS.
Pin
5
No Connection
6
TX-
7
No Connection
8
No Connection
Page 2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tpmim-32Tpmim-34Tpmim-24

Table of Contents