Module Status And Statistics; Port Status And Statistics; General Port Status And Statistics - Cabletron Systems 3F00-01 User Manual

Chapter 4: Monitoring and Managing the 3F00-01 and 3F55-01

4.2.1 Module Status and Statistics

The status and statistics described in this section are applicable to an I/O
module:
• Whether the module's temperature is too hot. [
• Results of diagnostics, when diagnostics were last performed on the
module (usually power-up). Possible values: diagnostics failed,
diagnostics still running, diagnostics passed. Status code for the
diagnostics that were last run on the module. [
• Whether the module is currently executing its operational software.
[ ]
hwInuse
• The manufacturing information for this module which includes part
number, hardware revision level, and serial number. [

4.2.2 Port Status and Statistics

The status and statistics described in this section are applicable to any
port.

4.2.2.1 General Port Status and Statistics

• The time, in centi-seconds (hundredth of a second), the port entered its
last state shown in the port, which will be one of the following:
- UP
The port can send/receive NMS packets; however, whether or not
the port has its bridging and/or routing functions enabled is not
indicated.
[
ifOperStatus = 1
- DOWN
The port is broken, or is intentionally physically disabled
[
ifOperStatus = 2
- TESTING
The port is in local loopback [
• The port type, which would be FDDI
FDDI Dual-Attached Intelligent Module User's Guide
]
]
ifOperStatus = 3
]
hwTempOK
]
hwDiagCode
hwManufData
]
Page 4-5
]