Cabletron Systems TRBMIM-T User Manual page 30

REQUIREMENTS AND SPECIFICATIONS
TPIM
TPIM-T1
TPIM-T2
TPIM-T4
TPIM-F2
TPIM-F3
See Appendix A for information about TPIM operational specifications
and Appendix B for information about media specifications.
Console Port
You can connect a management terminal to the RS-232C female DB9
console port on the TRBMIM-T to access Local Management. See the
TRBMIM/TRBMIM-T Local Management User's Guide for
information on setting up the management-terminal connection and using
Local Management.
Figure 2-3 shows the pinout diagram for the Console port.
Carrier Detect
Data Terminal Ready
Signal Ground
Console Cable And Cable Adaptors
Use the adaptors included with the RJ45-to-DB9 console cable to modify
the console cable and establish a management connection with either a
VT-series terminal or a PC.
2-4
Table 2-1 TPIM Specifications
Media Type
Shielded Twisted Pair
Unshielded Twisted Pair
Shielded Twisted Pair
Multimode Fiber Optic
Single-Mode Fiber Optic
1
Transmit 2
Receive 3
4
5
Figure 2-3 Console Port Pinout Diagram
Connector Type
DB9
RJ45
RJ45
ST
ST
6 Receive Clock
7 Request To Send
8 Clear To Send
9 Not Used