Using This Manual - Cabletron Systems TRBMIM-T User Manual

INTRODUCTION

1.3 USING THIS MANUAL

The manual is organized as follows:
Chapter 1, Introduction, describes this manual's conventions and
organizational structure, how to get technical help, TRBMIM-T features
and capabilities, source-route bridging concepts, and related reading and
reference sources.
Chapter 2, Requirements and Specifications, describes operational
requirements and specifications, including MMAC and management
module requirements, port specifications, and instructions for establishing
operational parameters using dip switches and shunting jumpers on the
component board.
Chapter 3, Installation, describes how to install the TRBMIM-T into an
MMAC.
Chapter 4, Establishing the Bridge Connection, describes how to setup
the front-panel bridge Station port and establish the physical bridge
connection between Token Rings.
Chapter 5, Monitoring and Troubleshooting, describes TRBMIM-T
monitoring and diagnostic tools: LANVIEW LEDs and the Power Up
Diagnostic screen. It also describes basic troubleshooting procedures.
Appendix A, TPIM Specifications, describes TPIM operational
specifications.
Appendix B, Media Specifications, describes design and performance
specifications for each of the media types used with the TRBMIM-T.
1-3