Attaching The Strain Relief Bracket - Cabletron Systems SEHI-22 User Manual

Figure 3-3. SEHI Rack Mount Hardware

3.3.3 Attaching the Strain Relief Bracket

Attach the strain relief bracket to the front of the SEHI as follows:
1. Locate the strain relief bracket and four 8-32 x 3/8 inch screws from
the accessory kit included with the SEHI.
Do not use screws other than those included with the SEHI
accessory kit. Use of longer screws may damage the unit or
cause electrical shock.
2. Attach the strain relief bracket to the bottom of the SEHI (Figure 3-3).
SEHI USER'S GUIDE
Rack Mounting
Brackets (2)
Strain Relief Bracket
HubSTACK
10BASE-T HUB LANVIEW®
WITH
SEHI-24
Figure 3-4. Attaching the Strain Relief
INSTALLING THE SEHI
1491_08
1490_7
3-5