Table of Contents
Advertisement
CHAPTER 6: LOCAL MANAGEMENT
6.3.2 The Configuration Screen
To access the Configuration screen from the Feature Selection screen, use
the arrow keys to highlight the IP Address Assignment option, then press
the Return key or F7. The Configuration screen shown in Figure 6-5
appears.
Assign the IP Address, Subnet Mask, and Default Gateway through the
SEHI Configuration screen. Use the Port Enable Override option to
enable all device ports in the stack. This option overrides the Port Disable
setting in the Statistics screen.
The following sections explain each field on the Configuration screen and
instructions on how to change them.
I/F
Gives the number of the interface corresponding to the channels over
which packets with that IP Address are passing. On the SEHI, this value is
always 1.
6-10
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
CONFIGURATION
I/F
IP Address
1
000.000.000.000
000.000.000.000
36
Default Gateway: 0.0.0.0
Serial Port 1 Application: CONSOLE
-
Port Enable Override: OVERRIDE DISABLED
SAVE
COMMUNITY NAMES
F6
F7
Figure 6-5. Configuration Screen
SubNET Mask
MAC Address
00-00-1d-05-dc-
Baud Rate: 9600 --ACTIVE-
TRAP TABLE
SNMP TOOLS
F8
F9
RETURN
1490_24
SEHI USER'S GUIDE
Hide quick links:
Advertisement
Table of Contents
