The Trap Table Screen - Cabletron Systems SEHI-22 User Manual

6.3.3 The Trap Table Screen

Access the Trap Table screen from the Features Selection screen using the
arrow keys to highlight the Component Trap Table option, then press the
Return key or F8. The screen shown in Figure 6-6 appears.
The Trap Table defines the management stations that will receive SNMP
Traps for alarm/event notification. The following sections explain each
field on the Trap Table screen and instructions on how to change them.
SNMP Community Name
Displays the community name included in the trap message sent to the
Network Management Station with the associated IP address.
Traps
Enables transmission of the traps to the network management station with
the associated IP address.
Trap IP Address
Indicates the IP address of the workstation to receive trap alarms from the
SEHI.
SEHI USER'S GUIDE
USING THE LOCAL MANAGEMENT SCREENS
SEHI LOCAL MANAGEMENT
Cabletron SEHI Revision X.XX.XX
SNMP Community Name
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
<CR>
SAVE COMMUNITY NAMES
F6 F7
Figure 6-6. Trap Table Screen
TRAP TABLE
Traps
N
N
N
N
N
N
N
N
IP TABLE SNMP TOOLS
F8 F9
IP Address
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
RETURN
1490_25
6-15