Management Terminal Setup Parameters - Cabletron Systems SEHI-22 User Manual

2. Attach the female end (25-pin or 9-pin, as applicable) to the COM port
on the terminal.
Console Cable
COM Port
Figure 6-1. Management Terminal Connection

6.1.2 Management Terminal Setup Parameters

Table 6-1 lists the setup parameters for the local management terminal. If
the terminal is a Digital Equipment Corporation VT320 terminal, press F3
to access the Setup Directory. If the local management terminal uses
terminal emulation of the VT320, refer to the equipment user manual for
setup procedures.
SEHI USER'S GUIDE
MANAGEMENT TERMINAL REQUIREMENTS
HubSTACK
10BASE-T HUB LANVIEW®
WITH
SEHI-24
COM
COM RJ45 Port
EPIM-2
EPIM-1
Management Terminal
1490_20
6-3