Table of Contents
Advertisement
CHAPTER 3: INSTALLATION
3.3.2 Rackmount Installation Requirements
To install the SEHI in a 19-inch rack, Cabletron Systems offers an
accessory kit to install the SEHI in a 19-inch rack that includes rack
mount brackets, mounting screws, and a strain-relief bracket for cable
management. The accessory kit is not included with the SEHI, but is
purchased separately from Cabletron Systems as part number
SEHI-ACCY-KIT.
Rack mounting the SEHI involves:
•
Attaching the strain relief bracket
•
Attaching the rackmount brackets
•
Installing the SEHI in a 19-inch rack
•
Interconnecting SEH units when applicable
Tools Required
•
Phillips Screwdriver
Materials Required
The following parts are included in the SEHI-ACCY-KIT accessory kit.
Use Figure 3-3 to determine the correct brackets to use for this
application.
•
Strain relief bracket
•
Left and right rackmount brackets
•
8-32 x 1/4" panhead screws (4)
•
8-32 x 3/8" panhead screws (4)
Use only the parts listed above to rack mount the SEHI. The
accessory kit includes other items not used in this application.
Use of the wrong brackets or screws may result in damage to
the unit or cause electrical shock.
3-4
SEHI USER'S GUIDE
Hide quick links:
Advertisement
Table of Contents
