CHAPTER 3: INSTALLATION
3.3.4 Rackmounting the SEHI
Refer to Figure 3-5 and proceed as follows to install the SEHI into a
19-inch rack.
1. Locate the four 8-32 x 1/4" screws and the two rackmount brackets in
the SEHI-ACCY-KIT package.
Do not remove the cover from the SEHI.
2. Using the four 8-32 x 1/4" screws provided in the SEHI-ACCY-KIT
accessory kit, attach the rack mounting brackets to the bottom of the
SEHI as shown in Figure 3-5.
Do not use screws other than the four 8-32 x 1/4" screws
included with the SEHI accessory kit. Use of longer screws
may damage the unit or cause electrical shock.
Figure 3-5. Installing the Rack Mount Brackets
3. With the mounting brackets installed, position the SEHI between the
vertical frame members of the 19-inch rack and fasten it securely with
mounting screws as shown in Figure 3-6.
3-6
HubSTACK
10BASE-T HUB
LANVIEW®
WITH
SEHI-24
Rack Mounting
Brackets (2)
Screws (4)
1490_8
SEHI USER'S GUIDE