Generating Configuration Updates - Cabletron Systems SmartSwitch 9W006 Quick Start Manual

QUICK START
C S R _1204'
ONFIGURING ITE EM
1. From the main IP subnet menu, click on Add.
2. Complete the Properties information.
a. Enter RemCSX for the Subnet Name.
b. Enter 231.231.220.0 for the Subnet Address (the subnet's IP address).
c. Enter a Subnet Mask of 255.255.255.192. This will allocate a smaller number of IP addresses
to this subnet.
d. Click on Add.
3. Add the Network Interfaces information.
a. Click on the Network Interfaces tab.
b. Click on Add.
c. Select Rem_1204 for the Site Name.
d. Select LAN for the Interface Type.
e. Edit the Address field so that it reflects this interface's IP address (231.231.220.1).
f. Select 1 for the LAN Port Number.
g. Click OK.
4. Add the Static Routes information for the static route leading to Rem_1204 (and beginning at
Central).
a. Click on the Static Routes tab.
b. Click on Add. Notice that the Destination Subnet is RemCSX.
c. Select Central as the Source Site Name.
d. Select Rem_1204 as the Next Hop Site Name.
e. Click OK. Close out of all of the windows.
We are now ready to generate updated configuration files for Central and Rem_1204.
G C
ENERATING ONFIGURATION
Generating and downloading updated system configuration files is done from SFVRA-CFG's
Export Configuration Menu. To get to that menu:
From the menu bar, click on Options, then click on Export Configurations, or simply click
the toolbar.
30 SmartSwitch Remote Access Module
LAN IP S
S UBNET
U
PDATES
on