Cabletron Systems SmartSwitch 9W006 Quick Start Manual page 10

QUICK START
Keyboard Connector
E C
THERNET ABLES
1. Insert the RJ-45 adapter at one end of the provided Ethernet cable into the module's Ethernet
port 1.
2. Insert the RJ-45 adapter at the other end of the Ethernet cable into one of the SmartSwitch 9000's
Ethernet ports.
3. Repeat steps 2 and 3 for Ethernet port 2 if you will be using a second Ethernet connection.
M -T A
OD AP DAPTER
The system's PRI RJ-45 adapter uses the international standard of pins 3, 4, 5, and 6 for transmit and
receive. Most T1 lines in the United States and Europe use the traditional 1, 2, 4, and 5 pins. We
provide an RJ-45 to RJ-45 Mod-Tap adapter that will convert between the two wiring systems.
10 SmartSwitch Remote Access Module
Power LED
WAN
SMB LED
9W006-400
Ethernet 1 & 2
Activity LEDs
VGA Video Ports
1
Ethernet Ports
2
1
2
MMAC
Smart
Ejector Tab
SWITCH
MMAC BUS
PRI/TI
Ejector Tabs
External Floppy
Drive Connector
RS232 Console
Connector
Parallel Port
3
PRI Ports
The 9W006-400
4