Configuring Ip Information - Cabletron Systems SmartSwitch 9W006 Quick Start Manual

c. Type in a 9 before the telephone number, then click on OK.
d. Repeat steps a through c for the second number, 5551112.
4. Click OK.
Now we will finish the connection group information by configuring each connection with an
unnumbered IP subnet.
C IP S
ONNECTION UBNET
Because IP is enabled for all of our connections, we need to adjust the connection information to
reflect the correct IP subnet associated with this connection. IP information is located under the
connection Protocols information.
1. From the Connection Groups' main window, click on Group1.
2. From the resulting screen, click on Edit Group Connections.
3. For each of the three connections:
a. Double click on the connection entry.
b. From the resulting screen, click on the Protocols tab.
c. You should be viewing the IP information. Make sure there is a check mark by Enable.
d. Select (UnNumbered) for the IP Subnet. We have selected unnumbered because all of our
connections are over an unnumbered interface. If they were over numbered interfaces, we
would need to first configure the
the group connection information and select the appropriate subnet (the user configured
subnets will not appear as an option for IP subnet until they are configured).
e. Click on OK.
Close all the open windows until you are back at the initial SFVRA-CFG window.
C IP I
ONFIGURING NFORMATION
You can configure or view IP network information in one of two ways: at the subnet level or at the
system level. The subnet view looks at IP network information with the "big picture" in mind; you
are viewing how multiple systems interconnect to form a subnet. The system view looks at IP
information with a specific system in mind; you are viewing how the individual system relates to
the rest of the network.
For our example network, we will need to configure a LAN subnet for sites Central and Rem_1204.
Each subnet will include a LAN interface and a static route. We will use the IP subnet view.
I
NFORMATION
IP subnet information, then we would need to return to
M C
ODULE ONNECTIVITY
Configuration Using SFVRA-CFG
9W006 and 9W007 27