Downloading Configuration Updates; Necessary Configuration For The Remote Devices - Cabletron Systems SmartSwitch 9W006 Quick Start Manual

Remote access module release 7.2
Hide thumbs Also See for SmartSwitch 9W006:
Table of Contents

Advertisement

1. Click on site Central from the Export Configurations' Systems window.
2. Click on Generate Updates.
3. You should see a message stating that the update for the system has generated successfully. If
the message includes warnings, correct any errors described in the warnings.
4. Click on Close. Note that the Updates Generated field displays YES (it was previously blank).
This indicates that the updated configuration files are ready for downloading.
Repeat the above steps for site Rem_1204. After the configuration updates have been generated, we
can download the updates directly to the system.
D
C
OWNLOADING
ONFIGURATION
Note:
Downloading updated configuration files does not update the system's existing
configuration files, it overwrites them.
To download the updated configuration files to Central and Rem_1204:
1. From the Export Configurations Systems window, select the site, then click on Download
Updates.
2. You will see a window with the system's IP address. SFVRA-CFG will download the
configuration files to this address.
3. Make sure New Revision is selected.
4. Click on OK.
5. You should see a message reporting that your download was successful. If the message
includes warnings, correct any errors described in the warnings.
6. Click on Close.
7. The Updates Generated field will again be blank, and the Downloaded Revision field will have been
incremented.
8. Click on Close.
Note that after downloading new configuration files the systems will automatically restart so that
the configuration changes will take effect.
N
C
ECESSARY
ONFIGURATION FOR THE
You must configure the following information on the remote devices that are not configurable
through SFVRA-CFG (in our example this includes sites Rem_Modem and Rem_100):
Site Central's phone numbers so that the remote device can dial out to Central. These phone
numbers are: 95551111 and 95551112.

Necessary Configuration for the Remote Devices

U
PDATES
R
EMOTE
M
ODULE
D
EVICES
9W006 and 9W007
C
ONNECTIVITY
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartswitch 9w007

Table of Contents