Cabletron Systems SmartSwitch 9W006 Quick Start Manual page 17

L SFVRA-CFG
AUNCHING
To start the SFVRA-CFG after its installation:
1. Open the SFVRA-CFG application.
2. From the menu bar, click on File then click on Connect, or click on the toolbar's connect icon.
3. A login ID dialog box will be displayed. Note that the first time you use the SFVRA-CFG
application, the login ID is set to SFVRACFG. If desired, you may edit this field to change the
login ID.
4. If required, enter your password.
5. Click OK.
The Connection section of this guide provides instructions for how to use SFVRA-CFG to configure
the information needed to get your module up and running.
After you complete the configuration, you will need to use SFVRA-CFG first to generate updated
configuration files and then to download the files to the module. Note that when the updated files
are downloaded, they overwrite the module's existing configuration files.
I
NSTALLING THE
Installing and Launching SFVRA-CFG
9W006 and 9W007
M
ODULE
17