Cabletron Systems SmartSwitch 9W006 Quick Start Manual page 25

First we will create the connection group with site Central as the central site, then we will add any
needed dial out phone numbers, and finally, we will configure each connection with an IP
unnumbered subnet.
A C
DDING THE ONNECTION
To create a connection group with site Central as the central site:
1. From the menu bar, click on Functions then click on Connection Groups, or click
toolbar.
2. Click on Add.
3. Enter Group1 as the group name.
4. Click on Add.
5. To define group members, click on Edit Group Members.
6. Select the Central Site by clicking on the Central Site down arrow, then select Central from the
displayed list.
7. Select the Remote Sites that will connect to the central site. Since we want to select all remaining
sites as remote sites, click on Select All.
8. To automatically configure a connection between the remote sites and the central site, make
sure there is a check next to Add connection to Central Site when Remote Site is added. This will
result in a star type configuration.
9. Click on OK.
Now we will continue the connection group configuration by entering any needed dial out phone
numbers.
C D O P
ONFIGURING IAL UT
We only need to be concerned about dial out numbers that will be used by devices we are
configuring with SFVRA-CFG. In our example this is only site Rem_1204. Site Central has no need
to call out to the remote sites so it does not need any dial out numbers. Devices not configurable by
SFVRA-CFG (in our example this would be site Rem_100 and site Rem_Modem) must have dial out
information configured directly on them.
Directory numbers we earlier configured under the site circuit information will appear under the
connection group telephone information. If the device dialing out to this number is required to use
any prefixes (such as area code or a 9 for Centrex numbers) we will be required to modify the
number to include the prefix. This is true for the dial out number used by site Rem_1204 to call into
site Central. To modify the number:
1. From the Connection Group window shown below, click on Edit Group Connections.
G
ROUP
N
HONE UMBERS
M C
ODULE ONNECTIVITY
Configuration Using SFVRA-CFG
on the
9W006 and 9W007 25