Cabletron Systems SmartSwitch 9W006 Quick Start Manual page 22

QUICK START
Configuring Site Central's Properties
1. Enter Central as the Site Name.
2. Select Local User Table as the site's User Database. The user database is the type of database this
site will use for user authentication.
3. Select DEFAULT for the Site Template.
4. Enter Central for the Device Authentication Name. This is the name that will be associated with
the site during authentication.
5. The module will be using CHAP security. Enter centsite for the CHAP Secret.
6. Click on Add. We can now enter contact and system information. Contact information is
optional; we will omit it. We will next configure the site's system information.
Configuring Site Central's System Information
1. Click on the Systems tab.
2. Click on Add System.
3. Select 9W006 -220 for the module's Product Code.
4. Click on Add.
5. To configure the site's circuit information:
a. Double click on the system ID of the system we just configured.
b. Click on the Circuits tab.
c. Double click on the first PRI resource listed for the module.
d. Enter the following Directory Number for the circuit: 5551111.
The directory number is the telephone number used for this circuit. When connection
groups are formed, this number is used for initial population of the phone list.
e. Click on OK.
f. Double click on the second PRI resource listed for the module.
g. Enter the following Directory Number for the circuit: 5551112.
h. Click on OK.
i. Close the open windows until you are back at the initial Sites window. We can now add the
next site.
A S R _M
DDING ITE EM ODEM
At the initial Site window, click on Add. We can now configure site properties and systems.
Configuring Site Rem_Modem's Properties
1. Enter Rem_Modem as the Site Name.
2. Select Other as the site's User Database. This is the correct option for devices that are not totally
configurable by SFVRA-CFG. Remember, for the Modem User device we can only configure
22 SmartSwitch Remote Access Module